Solid wood kitchen counters are all-natural items constructed from timber from trees about 120 years of ages. Timber is a living material and also the more moisture receives, the extra the timber countertop will broaden. The wood we utilized in strong timber worktops has actually been formerly kiln dried out to a moisture degree of 6%, and it is therefore vital that the worktop is not exposed to a regularly high degree of moisture. Generally the moisture level in cooking areas is approximately 50-70%.
The strong timber top must be connected to the closet box using only wood screws as well as washing machines. It is not suggested in all to adhesive the top on the cabinet box; the top as well as the box expand and acquire at different rates, as a result cracks may ultimately appear, many possibly on the cupboards' surface.
The appropriate way of installing a solid wood top is utilizing steel mendings along the cupboard box (see our internet page).
The steel correctings should be uniformly distributed throughout the size of the top, spaced at a 1' - 1.5' distance from each various other. Across the width, the top is normally dealt with to each metal support with 3 screws, one between, one towards the leading edge as well as one towards the rear edge. The assistances have to be flawlessly leveled; or else stress can develop in the timber, causing warping, cupping, or cracks.
We advise pre-drilling the screw holes right into the timber kitchen counter, to avoid fractures as well as divides. For the very same factor, it is a great idea not to over tighten up the screws. The ending up will substantially decrease the extent of such activities, but will certainly not remove them entirely. As a result of the panel's laminated structure, the lengthwise motions are insignificant, so the installer must focus on the activities occurring across the panel's size. In order to avoid the advancement of inner tensions, the holes in the metal fixings need to be elongated in the instructions of the activities (see our website ).
When exposed to regular humidity degrees - i.e. 50-60% - the worktop's size will certainly broaden by 1/12"-1/ 24", but when revealed to a degree of 80-90%, this measurement might increase by as much as 1/2" or perhaps extra for some species. Therefore, when the back side of the counter top is installed versus a wall surface, the wall surface might restrict the top's all-natural motions, leading to undesired tensions in the timber. To avoid this, you can permit a 1/4"-1/ 2" joint in between the wall and also the countertop side and caulk it with a slim quote of acid-free silicone.
Additionally, you can strongly deal with the rear edge to the metal sustains below and also hence, allow the natural motions to take place at the cost of the contrary edge.
In this case, the holes in the steel fixings representing the back side will certainly be no bigger than the screws size, while the holes representing the center section and also the leading edge will certainly be extended.
For live edge dining table added details relating to the installation of timber kitchen counters, bar tops and kitchen islands, please see our web page.